Spherical upper bearing fitment on Moser 12 bolt.
- Thread starter TOMS78BU
- Start date
Here is my thought for what it is worth.
Yes, the TRZ bushing is a nice peice, have them in my Cutlass.
Funny thing, my "ears" were to narrow on the stock 12 bolt, had to make a spacer, go figure!
But can you survive with out them, yes.
The arms you have already have joints on one end so they will move pretty freely.
It appears your car is set-up for mostly drags?
How much movement is your rear really going to have to worry about bind.
Do you a anti-roll or beefy swaybar?
The most my rear travels in 2 inches , it can move more but that's what the rings on the QA1s show.
Put it together and get racing!
Yes, the TRZ bushing is a nice peice, have them in my Cutlass.
Funny thing, my "ears" were to narrow on the stock 12 bolt, had to make a spacer, go figure!
But can you survive with out them, yes.
The arms you have already have joints on one end so they will move pretty freely.
It appears your car is set-up for mostly drags?
How much movement is your rear really going to have to worry about bind.
Do you a anti-roll or beefy swaybar?
The most my rear travels in 2 inches , it can move more but that's what the rings on the QA1s show.
Put it together and get racing!
Thanks shotgun. Your input is much appreciated. We went ahead and put it together as-is. I didn't wanna modify my brand new rear end. We just finished lowering the front, and there are a few little things to finish up and the car will be ready to hit the streets and the track again. Thanks to all for your advice, criticism, and encouragement.
Tom
Tom
Similar threads
