My next engine combo???

[ILLEGAL REGAL]

U just looked into the lsx a little more and what I would do is toss a 4" stroker crank in a 6.0 with some good pistons, use them l92 heads and just change the springs, add a nice cam--talking with the builder he said a 278h cam would be great-- and buy the holden intake for under $400 that matches those heads and it's under $400 with injectors and 90mm t-body.

or.. slap them heads on a stock 6.0 but have them milled to get the comprssion back, or even just pull a 07 escalade L92 motor and swap intakes

 

[Darracq]

some cranks will not work with the msd box so be carefull. Not sure what ones work,

 

[Darracq]

after some searching... there is a 32k mile LQ9 in MO for $1250..

from my understanding they have a 10:1 compression ratio.

Thats a good deal better pic it up.

 

[Robert1320]

I got one for $300.00
I now have 3 LS-x motors and One new LXS block.
I hope to have some All Pros on the way soon.

 

[Stangboy]

Stock 6.0 heads will support 1000 hp in a turbo car... with a spring upgrade.

 

[bottlesempty]

Truck intake manifold makes more overall power than car intake. It just doesn't fit most LSX cars. FYI.