This item is a new pair of lightweight design aluminum bumper mounts for G-body cars, years 1978-88 (Malibu/Monte Carlo/Regal/El Camino/Cutlass/Grand Prix etc. ) Items weigh 1 1/2 lbs each (3 lbs total per pair) and are made out aluminum tubing and plate and are specifically made for each G-body style. These are intended for off-road only (i.e., drag strip). If you are looking to replace all your mounts, you will need 2 pair (one pair for front, one pair for rear).   Contact Rick for more information. 

New Lightweight G-body/Malibu Radiator Support

Made from 3/4 x 3/4 square tubing, custom bent to fit 78-88 GM Malibu.  Made for Griffin radiator 31x19 but can be easily adapted to other radiators as well - if you send me your measurements of your radiator I can customize this for you.  Includes aluminum top mount.  Direct bolt in, weighs 7 lbs. Contact Rick for more information. 

 

For G-body cars.  Only 8 lbs and is made out of 4130 chrome moly tubing.  Custom made for specific transmission.  Contact Rick for more information. 
 

This item is a new, 16 gauge unpainted steel. A/C firewall block off plate for G-body type cars.

G-body extension (200R4 or t400) 78-83

Used with transmission cross member.  Required for some earlier G-bodies that did not have factory OD transmission option.  Contact Rick for more information. 

G-body 12-bolt uppers


 

Used for 64-72 A-body 10 or 12 bolt rear end installation into 78-88 G-body. 

G-body uppers

Double adjustable upper control arms for G-body.

G-body lowers

Non-adjustable solid lower control arms for G-body.

G-body Combo Uppers and Lowers

Double adjustable upper control arms and Non-adjustable solid lower control arms for G-body.

G-body Double Adjustable Lowers

Double adjustable lower control arms for G-body.

A-body Uppers

Double adjustable upper control arms for A-body.

A-body Lowers

Non-adjustable solid lower control arms for A-body.

A-body Combo

Double adjustable upper control arms and Non-adjustable solid lower control arms for A-body.