I'm going through the rear end of my bracket car getting ready to get the parts to swap a 9" in. Currently I have the factory F41 rear sway bar and I plan on stepping up to a weld in ARB, such as one from TRZ or Trick Chassis. I see they can come in sizes from 1-1/4" to 1-5/8" diameter, is there such a thing as too much rear ARB on the back of a drag car? Currently the car goes 1.75 in the 60' at high 12.90's-13.10 @ 103 ish with 4.11's in my time bomb of a 7.5" 10 bolt.
Thanks in advance!
Thanks in advance!