ING spots on the fuse box not working

dinosport

Daily Driver
Jul 21, 2015
43
0
0
Well I did a boo boo. I was trying to wire in a new tach and eliminate some wiring hack jobs I found under the dash. While I was at it I mustve done something because the spots on the fuse box that say Ing arent working anymore. They used to work with the key on. I was pulling a wire that did nothing and it was plugged in one of those so I suspect I grounded it. I know there is a fuseable link by the starter I heard but everything else seems to be working. Wondering if there is a separate fuse for just that circuit. If any knows please lmk before I tear the whole dash apart.
BTW its a 78 Malibu
 

LS6 Tommy

MalibuRacing Junkie
May 15, 2004
15,847
1
38
North Jersey
There are two red fusible links at the solenoid. They each feed one of two "Circuit 2" red 12 ga wires that go to the fuseblock. One feeds "batt 2 " and "batt 3" at the igntiion switch and "stop/hazard" and "accy" on the fuseblock. The other feeds "courtesy/clock" and "tail".

Tommy
 

MalibuRacing.com Gear

Stickers & Shirts!!