Rear swap issues

Doober

Moderator
Jun 2, 2003
14,704
1
38
Catalina, AZ
www.cardomain.com
Overall length (wheel mounting surface) should be around 58-58.5" I believe, and the shock mounts are on the rear side of the axle (right behind the lower trailing arm mounts).

I got a B-Body rear, but that's going to be its own little special animal... it will have to be shortened, but if the bearings are bigger than a G-Body then I'll keep the B-Body parts. The lower arms I'm not too worried about the fit, but if I have pinion angle issues from the uppers being too short (read they need to be shortened about 3") I have a 3-link idea in mind.
 

MalibuRacing.com Gear

Stickers & Shirts!!