Just found out my new BBC with only 25 min of run time has cut 7 lobes off the cam, frustrated and thinking about going to an LS engine. Trying to weigh the cost of fixing my new engine versus swapping to an LS. Friend has a 105k mi iron 6.0L from a 200-2001 2500 truck, engine is complete with coils, fuel rails, cable style throttle body harness and computer. Realistically i need to know what it will take to get the 6.0L into the car. From basic research I've found out about the 1" set back adapter plates, but need to know of there is any adapters required to mate with my current th400 and converter, and also if I can retain my current 1/2" hard aluminum fuel line and just change pumps etc...Also best and least cost headers that fit well and will flow well. Thanks.