two stage system

foureyed

Amateur Racer
Apr 6, 2012
124
0
0
janesville,wi 53548
I am wanting to put a two stage system on my car. My question is how to take the proper amount of timing out for the second stage. I have a digital 6 so the first stage will be retarded off that. And also id like anyones opinion on the 2 stage for sale here. Its not a cross bar its a parallel bar. I've heard the bottom bar might freeze up when the top is activated.thanks for any guidance. Big Papa.
 

foureyed

Amateur Racer
Thread starter
Apr 6, 2012
124
0
0
janesville,wi 53548
Bump.
 

foureyed

Amateur Racer
Thread starter
Apr 6, 2012
124
0
0
janesville,wi 53548
Thanks for all the replies guys. I will answer my own question. MSD makes a box that is a multiple system timing retard.pretty cool
http://www.msdignition.com/Products/RPM/Timing_Controls/Timing_Controls/8975_-_Digital_Multi-Retard.aspx
 

junk racing

Amateur Racer
I have a nx dual stage plate, i only have it pilled for 100 and 100. on the first stage i have 0 timing pulled second stage i have 4 degrees pulled also running a digital 6 box and a dedicated nos fuel system with 110...runs 6.40s this way


so its 200 total 4 degrees retarded on the spray....
 

foureyed

Amateur Racer
Thread starter
Apr 6, 2012
124
0
0
janesville,wi 53548
wow not much retard. i was running a 150 single shot. was taking out 6 degrees. i was always told 2 degrees for every 50 hp shot
 

art

Amateur Racer
Aug 8, 2008
249
0
16
Mastic, New York 11950
I ran a 100 shot on a plate and took no timing out either. Plugs told me I could add timing, but did not because of my cast pistons. I was getting ready to add some more when my car got stolen, so I cannot really help any further.
 

foureyed

Amateur Racer
Thread starter
Apr 6, 2012
124
0
0
janesville,wi 53548
Up in wisconsin we use this gadget called a wide band o2 sensor hooked to a laptop so we get accurate and immediate readings.
 

junk racing

Amateur Racer
nxplatekit.png
 

MalibuRacing.com Gear

Stickers & Shirts!!