lunati solid roller voodoo cam

Twister79

Amateur Racer
Dec 10, 2005
163
0
0
Orangeburg, SC
do you guys think this is to much cam for my 355 street/strip car mostly strip
i have an 10:1 comoression sbc 355 with rhs 220cc heads victor jr intake 750 holley hp carb th350 4200 stall 4:10 gears
 

Twister79

Amateur Racer
Thread starter
Dec 10, 2005
163
0
0
Orangeburg, SC
o i almost forgot plus an 200 shot nos system :D
 

bracketchev1221

Dragway Regular
Apr 22, 2009
1,111
1
0
Mountville Pa
What cam is it?
 

Twister79

Amateur Racer
Thread starter
Dec 10, 2005
163
0
0
Orangeburg, SC
Solid roller, rough idle. Excellent cam for serious Pro street/bracket applications. Excellent mid to upper RPM torque and horsepower in 383-406 cubic inch engines. Needs 3500 RPM stall speed converter, 10.5:1 or better compression, aftermarket exhaust system and 4.11 rear gear ratio.
•Advertised Duration (Int/Exh): 285/293
•Duration @ .050 (Int/Exh): 255/263
•Gross Valve Lift (Int/Exh): .600/.600
•LSA/ICL: 110/106
•Valve Lash (Int/Exh): 016/016
•RPM Range: 3000-7200
•Includes: Cam Only


Part Number: 60134
 

whiteghost

New Member
Oct 13, 2011
2
0
0
given that you will e spending some time on the street, i think you could go with a bit less duration and not sacrifice any area under the curve.
 

lilbowtie

Pro Stocker
Oct 5, 2004
1,736
0
0
Canton Mi.
I like the cam and it should work well at the track - lot of cam for the street and so is a 4200 stall. Your intake runners are too big especially a 355. I'm not a nitrous person but with a 200 shot I would think you would like to have a little more lob sep - maybe some nitrous guys can pipe in.
 

MalibuRacing.com Gear

Stickers & Shirts!!