New Product- A-body 12-Bolt to G-Body Swap Upper Control Arm

slimbo

Moderator
May 21, 2007
4,223
0
0
www.yellowbullet.com
run a spohn sway bar. you cant beat it. my junk goes consistent low 1.40 60 foots with it and umi double adj uppers and tubular lowers. stock springs and no air bags.
 

Jackal

Amateur Racer
Jul 21, 2008
228
0
0
Orillia, Ontario, Canada
Eta on non-adj uppers?
 

h2opunk182

Weekend Racer
Nov 8, 2008
96
0
0
Seaford, NY
whats the easiest way to install the bushings for the adj uppers.. i've tried grease, freezing them, and a bushing install tool, the only thing i haven't tried is a press.. which i don't have.. do you have any other recommendations??
 

Lovemy1981Malibu

Frequent Racer
Jan 16, 2009
535
0
16
Kettering, Ohio
h2opunk182 said:
whats the easiest way to install the bushings for the adj uppers.. i've tried grease, freezing them, and a bushing install tool, the only thing i haven't tried is a press.. which i don't have.. do you have any other recommendations??


I had mine professionally pressed in by a local machine shop. It cost me about $50 to have the old bushings removed and new urethane bushings pressed in.
 

406Monte

Dragway Regular
Nov 30, 2007
1,019
0
0
Hubert, NC
Ryan sent you a pm
 

dooorslammer

New Member
Feb 4, 2010
1
0
0
hi

I race 1980 malibu in nhra stock class k/sa . the engins is a 305 with stock specs
this car does 60ft in 1.52 average with a best of of 1.48 . What i would like to know is what really made the biggest improvement . please only front and back suspension
nothing with engine ,convertor, trans or gear ratrio

any help would be greatly appreciated

peter b 5749
 

Japc74

Daily Driver
Feb 2, 2011
22
0
0
Re: New Product- A-body 12-Bolt to G-Body Swap Upper Control

I am in the process of doing thus conversion. I want to know what is the biggest tire and tim combo. Including rim bs. I think I saw somewhere that the a body 10 bolt is a little bit wider than the g body 10 bolt. Some help please!! Thank you.
 

MalibuRacing.com Gear

Stickers & Shirts!!