Application info for G-Bodies: Shifter with appropriate stick: 391 8794 Shifter installation kit: 373 0017 Shifter body: 391 5401 Stick only: 538 8009 The '74-'81 F-Body with a T10 (w/o console) uses the exact same shifter body and stick, but uses...
Will install kit 373 0017 allow the shifter to come up through the factory hole in the floor? My car is a factory 3 speed on the floor car. It would be nice not to have to cut the floor. The shifter that came with the M21 is for a 60's Chevelle so the shifter is 3" or so too far back.
Will install kit 373 0017 allow the shifter to come up through the factory hole in the floor? My car is a factory 3 speed on the floor car. It would be nice not to have to cut the floor. The shifter that came with the M21 is for a 60's Chevelle so the shifter is 3" or so too far back.
I think so. The stock Saginaw 3/4 speeds had the shifter moved forward about 3" compared to a standard Muncie/T10 and that install kit looks about the same as the stock shifter mount location.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.