F41 and aftermarket bracing diagrams (pics added)

I checked the one on this site but it is small.

When I resize it, it is too blurry.

Looking for something that will fill a 8 1/2 x 11 sheet.
 

79Landau

Frequent Racer
Aug 28, 2005
372
0
0
Delhi Ontario,Canada
Re: Anyone got a good gbody frame diagram

try this

1979frame2.jpg


1979frame.jpg


if not..shoot me your email and I'll sent it to ya
 

shotgun

Pro Stocker
Thread starter
Re: Anyone got a good gbody frame diagram

Thanks, that worked. Here is what I wanted it for.

Any chance you have a 3/4 line view of the body. I would like to do one with the body braces also?

As you can tell from the pics below, I found a nice line drawing but would really like a 3/4 if anyone has one

Thanks again

Copyof1979frame-2.png
 

StreetBu

MalibuRacing Junkie
Mar 21, 2004
4,158
3
38
Upstate NY
Re: Anyone got a good gbody frame diagram

Could a mod please make these diagrams a sticky!
 

shotgun

Pro Stocker
Thread starter
I use wood. One long 4x4 and a stack 6" 2x4s.

It is best to use 2 floor jacks.

I run the 4x4 next to the frame and use 2x4 as spacers to hit the floor bracing. You are trying to spread the load over a large area and lift evenly.

The floor will crush if you just stick a floor jack under it and go.

Just take your time and apply a little common sense and it is not a bad job, atleast until a bolt snaps. :x
 

Doober

Moderator
Jun 2, 2003
14,704
1
38
Catalina, AZ
www.cardomain.com
shotgun said:
it is not a bad job, atleast until a bolt snaps. :x
Hey, it was that one that was stripped already because someone else tried to remove it previously, remember? ;) That's a main concern of mine with the '78 actually, I don't know how I'm going to replace all the body mount "nuts" that the bolts thread into :?
 

MalibuRacing.com Gear

Stickers & Shirts!!