In the middle of doing the blazer brake upgrade and i figured i might as well rebuild the front end while I'm at it. I don't want to replace my upper or lower control arms, i have the stock set for now. I have old saggy springs so i know that in order to get to where i am now stance wise i need to drop an inch or two.
I'm going to run .5 in taller upper and lower balljoints so that should lower the car .5 in or so and help with some suspension geometry.
what spring/shock combo would you recommend to use to close the wheel gap? I'm running a 17 in wheel 245/45/17. I have every suspension upgrade ever put on the g bodys to my knowlede i just want it to handle better but still ride decent. thanks will post some pictures up soon
I'm going to run .5 in taller upper and lower balljoints so that should lower the car .5 in or so and help with some suspension geometry.
what spring/shock combo would you recommend to use to close the wheel gap? I'm running a 17 in wheel 245/45/17. I have every suspension upgrade ever put on the g bodys to my knowlede i just want it to handle better but still ride decent. thanks will post some pictures up soon