Register    Login    Forum    Search    FAQ


Board index » TECHNICAL » Suspension Technical




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post Posted: Wed Aug 10, 2016 10:01 pm 
Offline
Amateur Racer

Joined: Tue Jun 08, 2004 1:06 pm
Posts: 226
Location: Houston, TX
Just an FYI.

I bought a pair of Speedway Motors front upper a-arms. These are chromoly tubing with aluminum cross shafts. Part number for both right and left side a-arms are 91034393-R.

http://www.speedwaymotors.com/IMCA-Spec ... ,2120.html

Speedway motors a-arms have no travel stops built in like the stock a-arms, but you loose about 4.5 lbs per side (roughly 9 lbs total) with these a-arms. The weight comparison included both a-arms having ball joints already installed.

8.7 lb - Stock A-arm weight
4.2 lb - Speedway Motors A-arm part# 91034393-R weight

These cross shafts have zerk fitting to lubricate the solid bushings.

There is also a little more clearance above cross shaft versus the stock control arms which may help in header or down pipe clearance.

Here is a link with another person using them on an S10.

http://www.s10forum.com/forum/f307/tubu ... ms-423939/

_________________
David Schultz
MalibuDave
www.manualbrakes.com
https://www.facebook.com/manualbrakescom-576443512373024/


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 1 post ] 

Board index » TECHNICAL » Suspension Technical


Who is online

Users browsing this forum: No registered users and 1 guest

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: