http://maliburacing.com/forum/

Horsepower & Torque Numbers
http://maliburacing.com/forum/viewtopic.php?f=48&t=116551
Page 1 of 1

Author:  79buwagon [ Tue Jan 29, 2013 8:25 am ]
Post subject:  Horsepower & Torque Numbers

Hey guys,i'm currently building a engine and i thought it would be interesting to get some guesses on the hp and torque it will make.The specs are below,lets here you guesses

331 sbc,4.030 bore 3.25 Stroke
12.5:1 compression
AFR 220 fully cnc heads
Brodix HV1002 Single Plane 4500 intake with custom 4150 adapter
950 Holley HP alky carb
Soild Roller Cam .630 lift,in/exh,301┬░/309┬░duration,3800-7600
Jesel Belt Drive
Canton Drag power Pan
Running it on Methanol

So let here some numbers Guys

Author:  lilbowtie [ Sat Feb 02, 2013 7:30 pm ]
Post subject:  Re: Horsepower & Torque Numbers

Thats an interesting combo and when you do run or dyno it I would like to know the results. I'm guessing it will be weak on the bottom and MPH on the top - should like RPM.
i'm guessing about 525.

Author:  prairiehotrodder [ Sat Feb 02, 2013 8:18 pm ]
Post subject:  Re: Horsepower & Torque Numbers

looks like you'll need a 5500 stall and 5.13 gears. A light car. I'm reall interested to know as well. I'm not real knowlegeable on what the methanol will do for you. Is that duration at .050?
brian

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/