Horsepower & Torque Numbers

79buwagon

Daily Driver
Dec 30, 2007
32
0
0
Nova Scotia,Canada
Hey guys,i'm currently building a engine and i thought it would be interesting to get some guesses on the hp and torque it will make.The specs are below,lets here you guesses

331 sbc,4.030 bore 3.25 Stroke
12.5:1 compression
AFR 220 fully cnc heads
Brodix HV1002 Single Plane 4500 intake with custom 4150 adapter
950 Holley HP alky carb
Soild Roller Cam .630 lift,in/exh,301°/309°duration,3800-7600
Jesel Belt Drive
Canton Drag power Pan
Running it on Methanol

So let here some numbers Guys
 

lilbowtie

Pro Stocker
Oct 5, 2004
1,736
0
0
Canton Mi.
Thats an interesting combo and when you do run or dyno it I would like to know the results. I'm guessing it will be weak on the bottom and MPH on the top - should like RPM.
i'm guessing about 525.
 

prairiehotrodder

Pro Stocker
Dec 17, 2005
1,576
4
38
46
Melfort Saskatchewan Canada
looks like you'll need a 5500 stall and 5.13 gears. A light car. I'm reall interested to know as well. I'm not real knowlegeable on what the methanol will do for you. Is that duration at .050?
brian
 

MalibuRacing.com Gear

Stickers & Shirts!!