so this would be my first car that i would like to put some Nos on and i need suggestions on how much it can handle the specs on the motor are as follows:
-The engine is a ZZ4 crate engine with Fast Burn heads & LT4 HOT cam. Induction is an Edelbrock RPM Air-Gap with a Holley 770 Street Avenger vacuum secondary carb.
- The Fuel System consists of a Holley Black fuel pump and regulator
- Ignition is Performance Distributors HEI/ MSD box
- TH350 with the 1-2 shif kit no trans break and stock converter
- GN 8.5 373 posi
- Main question is, can i piggy back of the main elec pump, or should i run a separate cell and pump?
- wat kinda system would work better for the street? plate or fogger?
thanks in advance
-The engine is a ZZ4 crate engine with Fast Burn heads & LT4 HOT cam. Induction is an Edelbrock RPM Air-Gap with a Holley 770 Street Avenger vacuum secondary carb.
- The Fuel System consists of a Holley Black fuel pump and regulator
- Ignition is Performance Distributors HEI/ MSD box
- TH350 with the 1-2 shif kit no trans break and stock converter
- GN 8.5 373 posi
- Main question is, can i piggy back of the main elec pump, or should i run a separate cell and pump?
- wat kinda system would work better for the street? plate or fogger?
thanks in advance