no dash lights. but the head lights come when I pull the knob but no dash. went to the fuse block no power coming from the 5 amp. so I used wire to power them up it worked but no power from the green wire on fuse five. why?
I have turned that knob about twenty times.. I went to the fuse no power on the left side which should be constant power. So I used jumper wire to give the right side of fuse power they'd worked.
Sometimes it is due to dirty contacts on the socket behind the cluster.
If you find there is power everywhere, but not getting to the bulb, remove the cluster and clean the copper contacts on the plug and the printed circuit board with a pencil eraser.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.