i've been talking with the tech line of company that made my wiring harness and they tell me that with my one wire alt i must run that small red wire and a small bypass wire that goes from the post on the back of the alt to the starter or battery.now this new to me,usally its the one or the three.he says because the alt is over 85 amps i must run the two.i'm use to just the one big wire from the batt or starter.he says its ok to run the small by pass wire instead of the big one,but must run more than one wire.i asked him if i should go big on the size of said by pass wire he said the 10 gauge that came with the harness will be fine.i'm very suspect of this one.any thoughts on this?... other than telling me NOT to run a one wire.as usual thanks a lot