If you unplug the big purple wire and purple/white wires under the dash, they will plug right into each other. The previous owner had this bypass set up. I need to pass tech inspection so the neutral safety needs to be installed on my B&M pro ratchet. I separated the two wires but the car still starts in gear ???
Am I correct that I need to plug the 2 back together, then I cut the purple, extend one end to the poles on the NSS then run a second from the pole back to the purple wire. Doesn't seem right with the existing bypass. What am i missing ??
Am I correct that I need to plug the 2 back together, then I cut the purple, extend one end to the poles on the NSS then run a second from the pole back to the purple wire. Doesn't seem right with the existing bypass. What am i missing ??