What 4speed parts can you use to convert to 4speed

[bww92ls1]

In a 79 Malibu can you easily convert to a 4 speed and use any old gm transmission or do you have to use the factory set up with a trans and bellhousing that was used in the g body 4 speeds?
I have a lakewood bellhousing and a hayes flywheel that I would like to use and find me a trans. It is a th350 now.

 

[TURNA]

Just about any, if not all 3 or 4 speed Muncie's or Saginaw's will fit into the Malibu without doing anything major to the car.

Hardest part with be cutting the floor board in the correct spot.

 

[Doober]

I'm not sure if your bellhousing has a provision for it, but the ballstud on the G-Body bellhousings was (I'm guessing here) about 3/4" below the 'normal' ballstud for the clutch fork. You also need a G-Body-specific clutch fork. I also agree with what Turna says.

For a bellhousing/fork, you could also check into the info at t5montecarlo's site:
http://www.garage-scene.com/t5-into-ag-body/t5_install_bellhousing.htm