I'm building a mild Olds 350 and just realized I don't want to waste it all if my converter is no good. Here is what I got so far.
Olds 350 stock bottom end.
Edelbrock cam: 204/214 Duration 448/472 Lift
Stock ratio roller rockers
Edelbrock performer intake
Double roller timing chain
Holley 750
Flowtech 1 5/8 to 3" full length headers
1970 Cutlass 350 heads, with larger 1.992 Intake Valves/1.624 Exhaust Valves
The heads will also raise the compression a tiny bit. The trans and converter are stock, not sure what the stall is and not sure what the compression is but hopefully I can get some help with that.
I will be doing my own research as well aside from this but I figured if someone felt like chiming in it would obviously be helpful. thanks.
Olds 350 stock bottom end.
Edelbrock cam: 204/214 Duration 448/472 Lift
Stock ratio roller rockers
Edelbrock performer intake
Double roller timing chain
Holley 750
Flowtech 1 5/8 to 3" full length headers
1970 Cutlass 350 heads, with larger 1.992 Intake Valves/1.624 Exhaust Valves
The heads will also raise the compression a tiny bit. The trans and converter are stock, not sure what the stall is and not sure what the compression is but hopefully I can get some help with that.
I will be doing my own research as well aside from this but I figured if someone felt like chiming in it would obviously be helpful. thanks.